Steel palisade fences and gates for general purposes ("GP" fences) in corrugated and angle pales for heights up to 2.4 m, with posts at 2.75 m centres. For General palisade fence, rolled steel angle pales and corrugated pales, plates, capes and connectors are made of S235JR material; circular, square and rectangular hollow sections are made from S235JRH materials.
Characteristics of corrugated pales for general steel palisade fences:
Item | Fence height above ground (m) |
Posts | Horizontal rails (rolled steel angle section) (mm) |
Pales | ||
---|---|---|---|---|---|---|
Rolled steel joist section (mm) |
Embedded length (mm) |
Angle (mm) |
Corrugated sheet thickness (mm) |
|||
GP15 | 1.50 | 102 × 44 | 525 | 40 × 40 × 4 | 40 × 40 × 5 | See Table 2 |
GP18 | 1.80 | 102 × 44 | 525 | 40 × 40 × 4 | 40 × 40 × 5 | |
GP21 | 2.10 | 102 × 44 | 625 | 45 × 45 × 4 | 40 × 40 × 5 | |
GP24 | 2.40 | 102 × 44 | 725 | 45 × 45 × 4 | 40 × 40 × 5 |
Pale profile | Thickness (mm) |
---|---|
Corrugated "W" section | 2.5 |
Corrugated "D" section | 3.0 |
Fence height above ground level (m) |
Minimum plan dimensions | |
---|---|---|
Square hole (mm) |
Round hole (mm) |
|
Less than 2.4 | 350 × 350 | 450 diameter |
2.4 | 350 × 350 | 450 diameter |
Related Links: